MÁY DÁN CẠNH NOLINE

Auto Wood giới thiệu máy dán cạnh noline, máy dán cạnh không dường lai, sử dụng keo khô nhanh.



MÁY DÁN CẠNH ACRYLIC NOLINE

II. Thông số kỹ thuật:

1
MÁY DÁN CẠNH TỰ ĐỘNG (Acrylic Edgebanding)

Model: ECE-900K





Phù hợp cho dán thẳng hoặc một phần nghiên sử dụng keo khô nhanh

-        Chiều dài phôi: 160mm~up




-        Chiều rộng phôi: 70mm~up




-        Độ cao kẹp phôi: 9~50mm


-        Chiều dày của ván bao gồm cạnh: 15~25mm

-        Áp suất khí tối thiểu: 6kg/c




-        Chiều dày của chỉ cạnh: 0.4~2mm













WORKING CONFIGURATION:




-        Tilting surgace forming: 3.75kw x 1 unit at 3000rpm(50HZ), with chipping saw

-        1st Pre. fine trimming unit:
                0.55kw x 1 unit at 12000rpm;
                equipped with ø 85mm diamond tipped sawblade (1 unit)

-        2nd Pre. fine trimming unit:
              0.85kw x 1 unit at 12000rpm;
              equipped with ø 150mm diamond tipped sawblade (1 unit)

-        Quick glue dispenser with nozzle and roller system: vertical gluing x 1 unit;
 angled gluing x 1 unit;
Gluing feed motor: 0.19 kw x 1 unit

-        Banding strips grooving: 0.35kw x 1 unit at 12000rp (variable via inverter, high frequency motor)

-        Catalyst coating system:

                          equipped with banding catalyst applicator (1 unit)
                          equipped with catalyst mist spray (2 units)

-        Edge pressure rubber belt press motor: 0.19kw x 1 unit
Banding feed motor: 0.19kw x 1 unit

-        Hot air gun: 2.2kw x 2 units





-        Front and rear end trimming units: 0.35kw x 2 units at 12000rpm (variable via inverter high frequency motor)

-        Top and bottom trimming units:
                          0.55kw x 2 units at 12000rpm (variable via inverter, high frequency motor) top trimming: straight knife cutterhead x 1 unit bottom trimming: straight knife cutterhead x 1 unit

Top and bottom trimming units:
                          0.55kw x 2 units at 12000rpm,
                          (variable via inverter, high frequency motor)
                          top trimming: 1.5R profiled cutterhead x 1 unit
                          bottom trimming: 1.5R profiled cutterhead x 1 unit

Top and bottom corner rounding trimming units:
                            0.35kw x 2 units at 12000rpm,
                            (variable via inverter, high frequency motor);
                            top corner rounding trimming:
                            1.5R profiled cutterhead x 1 unit
                            bottom corner rounding trimming:
                            1.5R profiled cutterhead x 1 unit

Feed motor: 3.75kw





Feed speed: 3-10m/min





Pressure beam elevation: 0.19kw




Total horsepower: 18.01kw


📲📲📲 Hotline:0935735558. Vương.
🏠 Máy chế biến gỗ Auto Wood. Số 16/5 An Phu Đông 10 , Phường An Phú Đông, Q12, Tp HCM.
Wed: autowood.com.vn